| Fredo Visitor
 
  
 
 Joined: 30 Oct 2012
 Posts: 1
 
 
 | 
			
				|  Posted: Tue Oct 30, 2012 12:17 pm    Post subject: Probleme reconnaissance lecteur virtuel avec Daemon Tools |   |  
				| 
 |  
				| Bonjour, 
 L'émulateur ne reconnait pas mon lecteur virtuel. J'utilise daemon tools lite.
 
 J'ai suivi votre tuto. Je pense que ça bloque au niveau des chiffres, lettres à entrer dans le fichier config
 
 Je suis sous Windows 7.
 
 Voici la config de mes lecteurs:
 
 
   
 Normalement que dois je entrer comme chiffres à "CD-Rom drive" et comme lettres à "CD-Rom drive letter ?
 
  	  | Quote: |  	  | # ---- # CD-ROM settings
 # ----
 [cdrom]
 ;
 ; CD-ROM drive
 ; --
 ; 0 -> first CD-ROM drive [default]
 ; 1 -> second CD-ROM drive
 ; ...
 ;
 drive=
 ;
 ; CD-ROM drive letter
 ; --
 ; (Windows 2000/XP only)
 ;
 ; D:
 ; E:
 ; ...
 ;
 
 | 
 
 Merci.
 |  | 
	
		| Rockman Regular
 
  
 
 Joined: 23 Jun 2004
 Posts: 155
 
 
 | 
			
				|  Posted: Thu Nov 01, 2012 7:57 pm    Post subject: |   |  
				| 
 |  
				| I'm sorry I don't speak French but I'll try to help anyway.   
 Look in log.txt for the [CD-ROM INIT] section. It'll look something like this:
 
 
  	  | Code: |  	  | [CD-ROM INIT]
 scanning drives...
 + drive E: ZEXALK TMROHYR  (port=1, unit=0)  [CDROM]
 opening ASPI DLL... could not open the DLL!
 found 1 CD-ROM drive(s)
 
 | 
 
 If both of your drives are listed then the problem is probably with daemon tools or your disc image (e.g. bad cue sheet). In windows (xp, 7) a PC-Engine disc usually shows up as an audio CD.
 
 I hope this helps!
   
 
 
 MACHINE TRANSLATION:
 
 Je suis désolé je ne parle pas français, mais je vais essayer d'aider de toute façon.
   
 Dans log.txt, recherchez la section [INIT CD-ROM]. Il va ressembler à ceci:
 
 
  	  | Code: |  	  | [CD-ROM INIT]
 scanning drives...
 + drive E: ZEXALK TMROHYR  (port=1, unit=0)  [CDROM]
 opening ASPI DLL... could not open the DLL!
 found 1 CD-ROM drive(s)
 
 | 
 
 Si deux de vos lecteurs n'apparaissent alors le problème est probablement avec daemon tools ou votre image disque (p. ex. mauvais cue sheet). Sous windows (xp, 7), qu'un disque de PC-Engine se présente généralement comme un CD audio.
 
 J'espère que cela aide!
  |  |