| View previous topic :: View next topic |
| Author |
Message |
chisel316
Visitor
Joined: 01 Sep 2008
Posts: 2
|
 Posted: Mon Sep 01, 2008 4:46 am Post subject: Escape for quit not working |
 |
|
For some reason, I can only quit PCE using the right-mouse button. I tried setting the option in the INI to 0 and 2 and neither work. It doesn't matter how I launch PCE (I normally launch it from MAMEWah). Why doesn't the escape key work?
Thanks,
chisel316 |
|
| Back to top |
|
 |
dmichel
Admin
Joined: 04 Apr 2002
Posts: 1166
Location: France
|
| Posted: Tue Sep 02, 2008 5:49 am Post subject: |
|
|
Go in the config->keyboard menu and check that the ESC key is mapped to the 'main menu', may be it was unmapped.
_________________
David Michel |
|
| Back to top |
|
|
chisel316
Visitor
Joined: 01 Sep 2008
Posts: 2
|
| Posted: Tue Sep 02, 2008 9:05 am Post subject: |
|
|
| dmichel wrote: | | Go in the config->keyboard menu and check that the ESC key is mapped to the 'main menu', may be it was unmapped. |
Thanks. That's exactly what the problem was. I actually figured it out before I saw your response. I knew it had to be a configuration issue, so I copied pce.exe to a new folder and ran it so it would create the config file again. Then escape worked correctly, so I started remapping my keys and noticed that the escape key was mapped by default. So then I replaced the config file with my old file and it wasn't mapped!
Peace \/
chisel316 |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
